Basic Info

• This report was automatically generated by gemini-2.5-flash-preview-05-20 at 2025-06-27 00:26:22.
• It includes the most recent 50 arXiv papers related to the keyword "(all:"ptychography" OR all:"electron microscopy")".
• This page is powered by ArxivSummaryDaily.

1. Quantitative structure determination from experimental four-dimensional scanning transmission electron microscopy via the scattering matrix

• Authors: Emmanuel W. C. Terzoudis-Lumsden, Alireza Sadri, Matthew Weyland, Laure Bourgeois, Stephanie M. Ribet, Georgios Varnavides, Colin Ophus, Timothy C. Petersen, Scott D. Findlay
• Date: 2025-06-26
• Objective: To further develop the scattering matrix approach for quantitative structure determination from four-dimensional scanning transmission electron microscopy (4D-STEM) data in thick samples, accounting for partial spatial coherence, unknown probe defocus, and dark field information.
• Finding: The paper demonstrates, through simulation, how the scattering matrix approach can be modified to better handle partial spatial coherence, unknown probe defocus, and incorporate information from the dark field region. By combining these developments, they successfully reconstructed the electrostatic potential of a monolithic $SrTiO_3$ crystal, showing good quantitative agreement with the expected structure, highlighting the power of 4D-STEM in quantitative structural analysis of thick materials.

2. Superconductivity in spin-orbit coupled BaBi$_3$ formed by \textit{in situ} reduction of bismuthate films

• Authors: Shama, Jordan T. McCourt, Merve Baksi, Gleb Finkelstein, Divine Kumah
• Date: 2025-06-25
• Objective: To investigate structural and chemical interactions at the heterointerface formed between Eu metal and the charge-ordered insulator $BaBiO_3$, which leads to emergent superconductivity.
• Finding: The study found that oxygen scavenging by an Eu adlayer at the $Eu/BaBiO_3$ interface leads to the formation of $EuO_x$ and the superconducting intermetallic $BaBi_3$, exhibiting superconductivity at 6 K. A combination of X-ray diffraction and electron microscopy measurements was crucial in identifying the formation of $BaBi_3$ and $EuO_x$ at the interface, providing direct structural and chemical evidence for the emergent superconductivity.

3. Broadband amplification of light through adiabatic spatiotemporal modulation

• Authors: M. H. Mostafa, M. S. Mirmoosa, E. Galiffi, S. Yin, A. Alù, S. A. Tretyakov
• Date: 2025-06-25
• Objective: To theoretically demonstrate that broadband amplification of light can be achieved using adiabatic spatiotemporal modulation patterns, without requiring sub-cycle temporal responses.
• Finding: The paper theoretically shows that broadband amplification is possible through adiabatic spatiotemporal modulation, compatible with recent advancements in temporal modulation of epsilon-near-zero materials. While not directly using electron microscopy as a technique in its findings, the paper notes the potential impact of this broadband gain mechanism in ultrafast optics and electron microscopy, suggesting future applications in these fields.

4. Lossless, Non-Volatile Post-Fabrication Trimming of PICs via On-Chip High-Temperature Annealing of Undercut Waveguides

• Authors: Yating Wu, Haozhe Sun, Bo Xiong, Yalong Yv, Jiale Zhang, Zhaojie Zheng, Wei Ma, Tao Chu
• Date: 2025-06-23
• Objective: To develop a nonvolatile, near-lossless post-trimming method for photonic integrated circuits (PICs) using high-temperature thermal treatment of undercut waveguides to compensate for manufacturing deviations.
• Finding: The proposed method, based on high-temperature annealing, induces irreversible lattice expansion in silicon waveguides, leading to a permanent reduction in the real refractive index (0.0173). Transmission electron microscopy (TEM) was used to confirm this irreversible lattice expansion, providing direct structural evidence for the mechanism behind the refractive index change, enabling precise, broadband, and stable tuning of PICs.

5. Determining the grain orientations of battery materials from electron diffraction patterns using convolutional neural networks

• Authors: Jonas Scheunert, Shamail Ahmed, Thomas Demuth, Andreas Beyer, Sebastian Wissel, Bai-Xiang Xu, Kerstin Volz
• Date: 2025-06-23
• Objective: To train convolutional neural networks (CNNs) to predict grain orientations from electron diffraction patterns of battery materials, aiming to improve accuracy and efficiency compared to conventional pattern matching.
• Finding: The study successfully trained CNNs on dynamically simulated electron diffraction patterns of $LiNiO_2$ to predict grain orientations with increased accuracy and efficiency compared to traditional pattern matching algorithms. This work demonstrates the significant potential of machine learning to accelerate the analysis of electron microscopy data, specifically electron diffraction patterns obtained from scanning transmission electron microscopy, for high-throughput characterization of polycrystalline materials.

6. Large volume 'chunk' lift out for 3D tomographic analysis using analytical plasma focussed ion beam -- scanning electron microscopy

• Authors: Ruth Birch, Shuheng Li, Sharang Sharang, Warren J. Poole, Ben Britton
• Date: 2025-06-21
• Objective: To present a workflow for site-specific large volume 'chunk' lift out and 3D serial sectioning using plasma focused ion beam scanning electron microscopy (plasma FIB-SEM) for 3D electron backscatter diffraction (EBSD) based crystallographic analysis.
• Finding: The paper details a robust workflow for preparing large-volume samples (e.g., $200 \times 200 \times 400 \mu m^3$) using plasma FIB-SEM for subsequent 3D EBSD analysis. This method, demonstrated on an indent in pure magnesium, enables comprehensive 3D characterization of material structures, including grains and deformation patterns, by leveraging the capabilities of scanning electron microscopy for imaging and EBSD for crystallographic analysis after precise ion beam milling.

7. Preferred Synthesis of Armchair SnS2 Nanotubes

• Authors: Abid, Luneng Zhao, Ju Huang, Yongjia Zheng, Yuta Sato, Qingyun Lin, Zhen Han, Chunxia Yang, Tianyu Wang, Bill Herve Nduwarugira, Yicheng Ma, Lingfeng Wang, Yige Zheng, Hang Wang, Salman Ullah, Afzal Khan, Qi Zhang, Wenbin Li, Junfeng Gao, Bingfeng Ju, Feng Ding, Yan Li, Kazu Suenaga, Shigeo Maruyama, Huayong Yang, Rong Xiang
• Date: 2025-06-19
• Objective: To synthesize tin disulfide ($SnS_2$) nanotubes with a preferred chiral angle using a sacrificial template and to understand the mechanism of this chirality-selective growth.
• Finding: The study successfully synthesized $SnS_2$ nanotubes with a high preference (85%) for armchair configuration using boron nitride nanotubes as templates. Atomic resolution imaging and nano-area electron diffraction were crucial in revealing the preferred armchair configuration and structural purity of the synthesized $SnS_2$ nanotubes. Furthermore, in-situ high-resolution transmission electron microscopy (HRTEM) directly verified the "zigzag nanoribbon to armchair nanotube" transition hypothesis, showing the real-time transformation of $SnS_2$ nanoribbons into nanotubes, providing key insights into the chirality-selective growth mechanism.

8. Plasmonic properties of individual bismuth nanoparticles

• Authors: Michael Foltýn, Michal Kvapil, Tomáš Šikola, Michal Horák
• Date: 2025-06-19
• Objective: To investigate the structural and optical properties of individual spherical bismuth nanoparticles and their localized surface plasmon resonances.
• Finding: The research demonstrated that bismuth nanoparticles support localized surface plasmon resonances (LSPRs) tunable from near-infrared to ultraviolet by changing nanoparticle size, and these resonances exhibit stability across the spectral bandwidth. Analytical transmission electron microscopy was employed to characterize the structural and optical properties of individual bismuth nanoparticles, providing single-particle level insights into their plasmonic behavior.

9. Bi2Te3-Sb2Te3-Bi2Te3 Lateral Heterostructures Grown by Molecular Beam Epitaxy

• Authors: Puspendu Guha, Sangmin Lee, Eunsu Lee, Hyeonhu Bae, Hoonkyung Lee, Miyoung Kim, Gyu-Chul Yi
• Date: 2025-06-19
• Objective: To achieve successful heteroepitaxial growth of $Bi_2Te_3-Sb_2Te_3-Bi_2Te_3$ periodic lateral heterostructures on hexagonal boron nitride (hBN) using molecular beam epitaxy.
• Finding: The study successfully fabricated $Bi_2Te_3-Sb_2Te_3-Bi_2Te_3$ lateral heterostructures with sharp, coherent interfaces. Electron microscopy, particularly aberration-corrected (Cs-corrected) high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), was critical in confirming the core ($Bi_2Te_3$), intermediate ($Sb_2Te_3$), and outermost ($Bi_2Te_3$) regions, and analyzing the in-plane heterojunctions at atomic resolution, demonstrating their epitaxial alignment and structural integrity.

10. $La_3Pd_2NaO_9$: A High-Valent Insulating Palladate

• Authors: Qingqing Yang, Ning Guo, Tieyan Chang, Zheng Guo, Xiaoli Wang, Chuanyan Fan, Chao Liu, Lu Han, Feiyu Li, Tao He, Qiang Zheng, Yu-Sheng Chen, Junjie Zhang
• Date: 2025-06-19
• Objective: To synthesize and characterize a new high-valent insulating palladate, $La_3Pd_2NaO_9$.
• Finding: The researchers successfully synthesized single crystals of $La_3Pd_2NaO_9$, an insulating palladate with Pd in a predominantly +4 oxidation state. Real-space imaging via scanning transmission electron microscopy (STEM) played a crucial role in confirming the crystal structure and revealing the excellent sample homogeneity, complementing X-ray diffraction results and other characterizations.

11. A new angle on stacking faults: Breaking the edge-on limit in high-resolution defect analysis

• Authors: Nicolas Karpstein, Lukas Müller, Andreas Bezold, Steffen Neumeier, Erdmann Spiecker
• Date: 2025-06-18
• Objective: To overcome the limitation of current electron microscopy techniques for reliable stacking fault analysis, enabling full structural discrimination of inclined stacking faults in fcc and $L1_2$ crystals.
• Finding: The paper introduces a novel high-resolution scanning transmission electron microscopy (HRSTEM) method that allows for the full structural discrimination of inclined stacking faults, breaking the long-standing edge-on limit. This method, demonstrated in a CoNi-based superalloy, leverages fault-induced de-channeling for contrast formation, which was revealed through simulations, enabling clear discrimination of fault types even in thick samples and providing comprehensive access to stacking faults on all glide planes.

12. Strongly coupled interface ferroelectricity and interface superconductivity in LAO/KTO

• Authors: M. D. Dong, X. B. Cheng, M. Zhang, J. Wu
• Date: 2025-06-18
• Objective: To investigate the coexistence and coupling between ferroelectric and superconducting orders at the interface of $LaAlO_3/KTaO_3(111)$ (LAO/KTO) heterostructures.
• Finding: The study discovered the coexistence of ferroelectric order and superconductivity at the $LAO/KTO(111)$ interface, where manipulating ferroelectricity can significantly change interfacial conductivity and cause superconductivity to diminish and reappear. Scanning transmission electron microscopy (STEM) was instrumental in confirming the ferroelectricity by revealing the displacement of K ions relative to Ta ions, aided by oxygen vacancies at the interface, providing atomic-scale structural evidence for the emergent ferroelectric order.

13. Polarization switching on the open surfaces of the wurtzite ferroelectric nitrides: ferroelectric subsystems and electrochemical reactivity

• Authors: Yongtao Liu, Anton V. Ievlev, Eugene A. Eliseev, Nana Sun, Kazuki Okamoto, Hiroshi Funakubo, Anna N. Morozovska, Sergei Kalinin
• Date: 2025-06-17
• Objective: To explore polarization switching and associated phenomena on the open surfaces of wurtzite ferroelectric nitrides using high-resolution piezoresponse force microscopy (PFM) and spectroscopy.
• Finding: The research revealed the presence of two weakly coupled ferroelectric subsystems and bias-induced electrochemical reactivity during polarization switching in wurtzite ferroelectric nitrides. While the primary technique used was PFM, the authors explicitly state that these PFM-based studies are "fully consistent with the recent electron microscopy observations of the shark-teeth like ferroelectric domains in nitrides," thereby reinforcing the universal phenomenological picture of polarization switching established by both techniques.

14. Unraveling structural and magnetic information during growth of nanocrystalline SrFe12O19

• Authors: Cecilia Granados-Miralles, Matilde Saura-Múzquiz, Espen D. Bøjesen, Kirsten M. Ø. Jensen, Henrik L. Andersen, Mogens Christensen
• Date: 2025-06-17
• Objective: To follow the hydrothermal synthesis of magnetic strontium hexaferrite ($SrFe_{12}O_{19}$) nanocrystallites in situ and unravel structural and magnetic information during their growth.
• Finding: The study found that $SrFe_{12}O_{19}$ forms through an intermediate six-line ferrihydrite ($FeOOH$) phase, which influences the final magnetic properties. Transmission electron microscopy (TEM) was used in conjunction with Rietveld refinements of powder X-ray diffraction (PXRD) data to confirm the hexagonal platelet morphology of the $SrFe_{12}O_{19}$ nanocrystallites, providing direct visualization of their structure and shape.

15. Structural Inhomogeneities and Suppressed Magneto-Structural Coupling in Mn-Substituted GeCo2O4

• Authors: Shivani Sharma, Pooja Jain, Benny Schundelmier, Chin-Wei Wang, Poonam Yadav, Adrienn Maria Szucs, Kaya Wei, N. P. Lalla, Theo Siegrist
• Date: 2025-06-16
• Objective: To conduct a comprehensive study of the $Ge_{1-x}Mn_xCo_2O_4$ (GMCO) system, focusing on the influence of Mn substitution on its crystal and magnetic structure and properties.
• Finding: The research revealed surprising phase separation in $Ge_{0.5}Mn_{0.5}Co_2O_4$, consisting of a Mn-rich primary phase and a Ge-rich secondary phase. Scanning electron microscopy (SEM) combined with energy-dispersive X-ray (EDX) analysis was crucial for identifying and quantifying the stoichiometry of these distinct phases, providing direct evidence of the structural inhomogeneities that influence the magnetic and heat capacity properties of the material.

16. Atomic-scale insights on grain boundary segregation in a cathode battery material

• Authors: Inger-Emma Nylund, Elise R. Eilertsen, Constantinos A. Hatzoglou, Kaja Eggen Aune, Ruben Bjørge, Antonius T. J. van Helvoort, Ann Mari Svensson, Paraskevas Kontis
• Date: 2025-06-16
• Objective: To study the grain boundary segregation in the Co-free pristine spinel $LiNi_{0.5}Mn_{1.5}O_4$ cathode material at the atomic scale.
• Finding: The study observed the segregation of Mn and depletion of Ni, O, and Li at grain boundaries, as well as segregation of Na impurity. Transmission electron microscopy, specifically electron energy loss spectroscopy (EELS), was used to detect the segregation of Mn and depletion of Ni at grain boundaries, while atom probe tomography confirmed these observations and further revealed the segregation of O and depletion of Li and the segregation of Na, providing crucial atomic-scale insights into the material's composition at interfaces.

17. Direct visualization of visible-light hyperbolic plasmon polaritons in real space and time

• Authors: Atreyie Ghosh, Calvin Raab, Joseph L. Spellberg, Aishani Mohan, Sarah B. King
• Date: 2025-06-16
• Objective: To achieve the first direct real-space and real-time visualization of hyperbolic plasmon polaritons (HPPs) in natural materials operating at visible frequencies.
• Finding: The research successfully achieved the first direct real-space and real-time visualization of visible-light hyperbolic plasmon polaritons in $MoOCl_2$ using time-resolved photoemission electron microscopy. This advanced electron microscopy technique, with femtosecond time resolution and nanometer spatial resolution, enabled direct measurement of HPP propagation velocities and lengths, real-time observation of plasmon-material edge interactions, and visualization of hyperbolic focusing phenomena, validating theoretical predictions.

18. Extrinsic Dopants as Growth Modifiers in Cu-Cr-O delafossites: A Study of Incorporation Limits and Film Properties

• Authors: Marco Moreira, Yves Fleming, Patrick Grysan, Christele Vergne, Adrian Marie Philippe, Petru Lunca-Popa
• Date: 2025-06-16
• Objective: To investigate how various extrinsic dopants influence the structure and properties of Cu-Cr-O delafossite thin films grown by metal-organic chemical vapor deposition.
• Finding: The study found that while dopant incorporation was limited, it subtly influenced film stoichiometry and properties, leading to a slight red-shift in the absorption edge. Transmission electron microscopy (TEM) was used to confirm that films grown on c-plane sapphire were epitaxial near the substrate interface but relaxed into a polycrystalline structure beyond 20 nm, while films on silicon were polycrystalline throughout, providing crucial insights into the film morphology and growth behavior.

19. Designing artificial zinc phosphate tribofilms with tailored mechanical properties by altering the chain length

• Authors: Sebastian Lellig, Subisha Balakumar, Peter Schweizer, Eva P. Mayer, Simon Evertz, Marcus Hans, Damian M. Holzapfel, Yin Du, Qing Zhou, Martin Dienwiebel, Johann Michler, Jochen M. Schneider
• Date: 2025-06-13
• Objective: To design artificial sulfur-free zinc phosphate tribofilms with tailored mechanical properties by controlling their chain length through annealing.
• Finding: The research demonstrated that the chain length of sputtered zinc phosphate coatings can be reduced by increasing annealing temperature, transforming them from metaphosphates to orthophosphates, which in turn increases hardness and wear resistance while reducing Young's modulus. Transmission electron microscopy (TEM) combined with energy-dispersive X-ray spectroscopy (EDX) line scans confirmed that the composition change observed on the surface by XPS extended throughout the entire thickness of the coating, providing direct evidence of the bulk structural modification.

20. Kinetics of Amorphous Defect Phases Measured Through Ultrafast Nanocalorimetry

• Authors: W. Streit Cunningham, Tianjiao Lei, Hannah C. Howard, Timothy J Rupert, Daniel S. Gianola
• Date: 2025-06-13
• Objective: To explore the kinetics of grain boundary confined amorphous defect phases using ultrafast differential scanning calorimetry and correlate phase evolution with grain stability.
• Finding: The study successfully investigated the kinetics of amorphous defect phases confined at grain boundaries in Al-based nanocrystalline alloys, determining a critical cooling rate of $2,400^\circ C/s$ for the disordered-to-ordered transition and demonstrating remarkable microstructural stability after repeated annealing. Correlative transmission electron microscopy (TEM) was applied to link the observed phase evolution and grain stability to the nanocalorimetry signatures, providing direct microstructural evidence of the defect phase behavior.

21. From stripes to hexagons: strain-induced 2D Pb phases confined between graphene and SiC

• Authors: Markus Gruschwitz, Sergii Sologub, Chitran Ghosal, Zamin Mamiyev, Yuran Niu, Alexei Zakharov, Christoph Tegenkamp
• Date: 2025-06-12
• Objective: To investigate the intercalation process of Pb beneath graphene on SiC(0001) and the formation of different 2D Pb monolayer phases.
• Finding: The research revealed the formation of distinct 2D Pb monolayer phases, including stripes and hexagons, which emerge due to the interplay of substrate pinning and strain within the Pb layer. Various microscopy techniques, including scanning electron microscopy (SEM), scanning tunneling microscopy (STM), and low-energy electron microscopy (LEEM), were employed to investigate the intercalation process across multiple length scales, providing comprehensive insights into the structural evolution of these confined 2D phases.

22. Studying all-optical magnetization switching of GdFe by double-pulse laser excitation

• Authors: Rahil Hosseinifar, Felix Steinbach, Ivar Kumberg, José Miguel Lendínez, Sangeeta Thakur, Sebastien E. Hadjadj, Jendrik Gördes, Chowdhury S. Awsaf, Mario Fix, Manfred Albrecht, Florian Kronast, Unai Atxitia, Clemens von Korff Schmising, Wolfgang Kuch
• Date: 2025-06-12
• Objective: To explore the effects of double-pulse laser excitation on all-optical magnetization switching in a GdFe ferrimagnetic alloy, investigating the speed and frequency limits of this process.
• Finding: The study demonstrated that a second laser pulse, arriving as early as 3 ps after the first, can re-switch the magnetization of a GdFe alloy, with this re-switching persisting up to about 40 ps. Photoemission electron microscopy (PEEM) and Kerr microscopy were used for magnetic domain imaging, providing direct visualization of the magnetization states and their switching behavior in response to the ultrafast laser pulses, crucial for understanding the dynamics of all-optical switching.

23. Designing Corrosion-Resistant CoCrNi Medium Entropy Alloys via Short-Range Order Modification

• Authors: Elaf A. Anber, Debashish Sur, Annie K. Barnett, Daniel L. Foley, Andrew M. Minor, Brian L. DeCost, Howie Joress, Anatoly I. Frenkel, Michael L. Falk, John R. Scully, Mitra L. Taheri
• Date: 2025-06-11
• Objective: To explore the evolution of chemical short-range order (CSRO) in CoCrNi medium entropy alloys and its correlation with passive film formation and corrosion resistance.
• Finding: The research established a direct connection between alloy chemical short-range order (CSRO) and aqueous passivation in CoCrNi, showing that aging treatment increases Cr-Cr CSRO and enhances passive film formation kinetics and corrosion protection. Transmission electron microscopy (TEM) was one of the key techniques employed, alongside X-ray absorption fine structure, atomistic simulations, electrochemical methods, and X-ray photoelectron spectroscopy, contributing to the comprehensive understanding of the structural modifications and their impact on corrosion resistance.

24. Rock-salt ScN(113) layers grown on AlN$(11\bar{2}2)$ by plasma-assisted molecular beam epitaxy

• Authors: Duc V. Dinh, Esperanza Luna, Oliver Brandt
• Date: 2025-06-11
• Objective: To report the growth and characterization of rock-salt ScN(113) layers on AlN$(11\bar{2}2)/Al_2O_3(10\bar{1}0)$ templates using plasma-assisted molecular beam epitaxy.
• Finding: The study successfully grew pure (113) oriented rock-salt ScN layers with rotational twins on AlN templates. Transmission electron microscopy (TEM), in conjunction with X-ray diffractometry, was crucial for confirming the pure (113) surface orientation and identifying two distinct in-plane relationships between ScN(113) and AlN$(11\bar{2}2)$, providing detailed structural characterization of the epitaxial layers.

25. Optimizing Atomic Number Contrast in Multislice Electron Ptychography

• Authors: Bridget R. Denzer, Colin Gilgenbach, James M. LeBeau
• Date: 2025-06-11
• Objective: To explore the atomic number ($Z$) dependence of multislice electron ptychography and identify approaches to optimize its Z sensitivity.
• Finding: The research demonstrated that the Z-dependence in multislice electron ptychography is highly dependent on the integrated area of an atom column, revealing a monotonic Z-dependence for small integration areas and a non-monotonic trend following orbital shell-structure for larger areas. This non-monotonic behavior was shown to be useful for accentuating contrast between elements differing by only a single atomic number, even in thick samples (e.g., $\beta$-CuZn), highlighting how optimizing the atom column integration area in electron ptychography can enhance Z-contrast for specific applications.

26. Full ab initio atomistic approach for morphology prediction of hetero-integrated crystals: A confrontation with experiments

• Authors: Sreejith Pallikkara Chandrasekharan, Sofia Apergi, Chen Wei, Federico Panciera, Laurent Travers, Gilles Patriarche, Jean-Christophe Harmand, Laurent Pedesseau, Charles Cornet
• Date: 2025-06-10
• Objective: To propose a comprehensive first-principle atomistic approach for predicting the equilibrium shape and wetting properties of crystals heterogeneously integrated on a dissimilar material.
• Finding: The proposed method, which uses density functional theory to determine surface and interface energies, successfully predicted the equilibrium shapes of GaP crystals grown on Si. These predictions were found to be in good agreement with experimental observations performed by Transmission Electron Microscopy, demonstrating the method's accuracy and utility for optimizing hetero-structured materials.

27. Defect complexes in CrSBr revealed through electron microscopy and deep learning

• Authors: Mads Weile, Sergii Grytsiuk, Aubrey Penn, Daniel G. Chica, Xavier Roy, Kseniia Mosina, Zdenek Sofer, Jakob Schiøtz, Stig Helveg, Malte Rösner, Frances M. Ross, Julian Klein
• Date: 2025-06-09
• Objective: To establish a comprehensive defect library in bilayer CrSBr by combining atomic-resolution imaging, deep learning, and ab-initio calculations.
• Finding: The study successfully identified and classified various defect complexes in bilayer CrSBr, including Cr interstitial defects, combined Cr and Br vacancy defects, and extended lines of vacancy defects, using atomic-resolution Scanning Transmission Electron Microscopy (STEM) combined with a custom deep learning workflow. Electron microscopy provided the high-resolution images necessary for defect identification, and the deep learning classification enabled the discovery of distinct defect types whose occurrence aligned with computed structures and binding energies, revealing their potential for localized electronic states.

28. Probing Millikelvin Temperature Sensitivity in Chiral Nanoparticles via Optical Forces

• Authors: Seongmin Im, Wei Hong, Gayatri Chandran, Xing Wang, Yang Zhao
• Date: 2025-06-07
• Objective: To investigate the origin of photothermal force, enable nanoscale mapping, and evaluate temperature sensitivity using tip-based optical force nanoscopy.
• Finding: The study demonstrated a tip-based optical force nanoscopy system, combined with phase-informed decomposition, that achieves a temperature sensitivity of approximately 0.1 K for probing photothermal effects in chiral nanoparticles. While the paper explicitly mentions electron microscopy requires vacuum conditions and restricts in situ applicability, it positions its optical force nanoscopy as an alternative for nanoscale photothermal mapping under ambient conditions, highlighting the limitations of EM for this specific application.

29. Imaging 3D polarization dynamics via deep learning 4D-STEM

• Authors: Jinho Byun, Keeyong Lee, Myoungho Jeong, Eunha Lee, Jeongil Bang, Haeryong Kim, Geun Ho Gu, Sang Ho Oh
• Date: 2025-06-07
• Objective: To develop a deep learning framework combined with four-dimensional scanning transmission electron microscopy (4D-STEM) for reconstructing 3D polarization maps in ferroelectric thin-film capacitors.
• Finding: The developed deep learning framework, integrated with 4D-STEM, enabled the reconstruction of 3D polarization maps in Ba$_{0.5}$Sr$_{0.5}$TiO$_{3}$ thin-film capacitors with picometer-level accuracy under applied electric fields. 4D-STEM provided the raw diffraction data, and the deep learning approach allowed for the crucial depth resolution, revealing polar nanodomains and showing that polarization switching occurs through coordinated vector rotation rather than magnitude changes, with regions of higher topological density exhibiting protection.

30. Unusual Electron-Phonon Interactions in Highly Anisotropic Two-Dimensional Ta_2$$Ni_3$$Te_5

• Authors: Fei Wang, Qiaohui Zhou, Hong Tang, Fan Zhang, Yanxing Li, Ana M Sanchez, Keyuan Bai, Sidra Younus, Chih-Kang Shih, Adrienn Ruzsinszky, Xin Lu, Jiang Wei
• Date: 2025-06-06
• Objective: To unveil unusual anisotropic electron-phonon coupling behaviors in quasi-one-dimensional Ta_2$$Ni_3$$Te_5 nano-flakes.
• Finding: The study revealed unusual anisotropic electron-phonon interactions in Ta_2$$Ni_3$$Te_5 nano-flakes, where high-resolution transmission electron microscopy (HRTEM) and scanning tunneling microscopy (STM) directly visualized the pronounced quasi-one-dimensional atomic chains, providing the structural basis for the observed anisotropy. The integration of these electron microscopy techniques with angle-resolved polarized Raman spectroscopy and density functional perturbation theory (DFPT) was crucial for establishing the structural foundation and understanding the complex anisotropic electron-photon and electron-phonon interactions.

31. Three-Dimensional Porous Structures of CO$_2$-Induced Salt Precipitation Sustaining Halite Self-Enhancing Growth

• Authors: Mohammad Nooraiepour, Mohammad Masoudi, Hannelore Derluyn, Pascale Senechal, Peter Moonen, Helge Hellevang
• Date: 2025-06-05
• Objective: To investigate halite crystallization and brine consumption in porous media during CO$_2$ storage, focusing on the formation of three-dimensional porous structures.
• Finding: The study utilized time-lapse X-ray and spectral micro-computed tomography, along with scanning electron microscopy (SEM) and deep learning-assisted image analysis, to visualize the spatio-temporal dynamics of salt-brine coexistence and halite precipitation. SEM provided crucial insights into the morphology and structure of the three-dimensional halite growth, which functions as a secondary porous medium, revealing how expanding gas-liquid contact surfaces and initial crystal nucleation sites enhance evaporation and growth rates, leading to self-enhancing salt growth.

32. Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

• Authors: Richard H. J. Kim, Samuel J. Haeuser, Joong-Mok Park, Randall K. Chan, Jin-Su Oh, Thomas Koschny, Lin Zhou, Matthew J. Kramer, Akshay A. Murthy, Mustafa Bal, Francesco Crisa, Sabrina Garattoni, Shaojiang Zhu, Andrei Lunin, David Olaya, Peter Hopkins, Alex Romanenko, Anna Grassellino, Jigang Wang
• Date: 2025-06-05
• Objective: To demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy for elucidating dielectric losses, structural heterogeneity, and interface imperfections in superconducting qubits.
• Finding: The study successfully demonstrated noninvasive THz nano-imaging/-spectroscopy on encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. The paper explicitly contrasts this method with destructive electron microscopy, highlighting THz near-field methods as a promising high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols, thereby presenting an alternative to traditional EM for certain diagnostic needs.

33. Neural Object Detection for 4D STEM: High-Throughput Sub-Pixel Electron Diffraction Pattern Recognition

• Authors: Arda Genc, Ravit Silverstein
• Date: 2025-06-04
• Objective: To introduce an end-to-end post-processing framework for large-scale four-dimensional scanning transmission electron microscopy (4D-STEM) datasets using a neural network-based object detection model.
• Finding: The developed framework, centered on a sub-pixel accurate object center localization algorithm, achieved high-precision and high-throughput analysis of electron diffraction patterns from 4D-STEM datasets. This approach demonstrated a strain measurement precision of 5x$10^{-4}$ in a Si/SiGe multilayer TEM sample and accelerated crystallographic phase identification and strain mapping in complex multiphase metallic alloys by processing speeds exceeding 100 frames per second, showcasing the power of deep learning to extract quantitative information from complex electron microscopy data.

34. Interfacial Energy Gradients Drive Coalescence of Supported Nanoparticles

• Authors: Cheng-Yu Chen, Duncan Burns, Peter W. Voorhees, Eric A. Stach
• Date: 2025-06-04
• Objective: To investigate the dynamics of platinum (Pt) nanoparticle coalescence on dynamically evolving, heterogeneous silicon nitride (SiN$_x$) substrates.
• Finding: The study employed in situ transmission electron microscopy (TEM) to observe Pt nanoparticle dynamics on SiN$_x$ substrates, where localized crystalline Si nanodomains were formed. In situ TEM allowed for direct, real-time observation of Pt nanoparticles transforming into more mobile platinum silicide (Pt$_3$Si) and exhibiting pronounced directional migration away from Si pads, driven by interfacial energy gradients. This direct visualization provided critical insights into how local substrate chemistry and interfacial energy landscapes dictate nanoparticle migration and assembly, challenging conventional coalescence models.

35. Spatial correlations of charge density wave order across the transition in 2H-NbSe2

• Authors: Seokjo Hong, Jaewhan Oh, Woohyun Cho, Soyoung Lee, Colin Ophus, Yeongkwan Kim, Heejun Yang, SungBin Lee, Yongsoo Yang
• Date: 2025-06-03
• Objective: To probe the spatial distribution and correlations of charge density wave (CDW) order in 2H-NbSe$_2$ using cryogenic four-dimensional scanning transmission electron microscopy (4D-STEM).
• Finding: The study successfully performed cryogenic 4D-STEM measurements on 2H-NbSe$_2$ down to 20 K, enabling the mapping of spatial distribution of CDW superlattice intensities at nanometer-scale resolution. By analyzing autocorrelations of these intensities, the temperature-dependent correlation length of the local CDW order parameter amplitude was extracted, revealing weak short-range amplitude correlations persisting above the transition temperature. This demonstrates 4D-STEM as a powerful tool for probing spatially inhomogeneous electronic order in quantum materials, providing direct visualization of CDW order.

36. Energy Time Ptychography for one-dimensional phase retrieval

• Authors: Ankita Negi, Leon Merten Lohse, Sven Velten, Ilya Sergeev, Olaf Leupold, Sakshath Sadashivaiah, Dimitrios Bessas, Aleksandr Chumakhov, Christina Brandt, Lars Bocklage, Guido Meier, Ralf Röhlsberger
• Date: 2025-05-31
• Objective: To address a one-dimensional phase problem in X-ray scattering from ultrasharp nuclear resonances by leveraging multiple energetically overlapping measurements for phase retrieval, similar to ptychographic phase retrieval in imaging.
• Finding: The study developed an approach for one-dimensional phase retrieval in X-ray scattering, drawing an analogy to ptychographic phase retrieval used in imaging. While the paper focuses on X-ray scattering, the mention of "ptychographic phase retrieval in imaging" implicitly connects to electron ptychography, a powerful electron microscopy technique for high-resolution phase imaging. The method's robustness in overcoming bandwidth limitations opens new research directions, potentially impacting electron ptychography development by offering insights into phase retrieval algorithms.

37. Influence of X-ray Irradiation on the Magnetic and Structural Properties of Gadolinium Silicide Nanoparticles for Self-Regulating Hyperthermia

• Authors: Samantha E. Smith, Santiago Bermudez, Pavan Chaitanya, Zoe Boekelheide, Jessika Rojas Marin, Ravi L. Hadimani
• Date: 2025-05-30
• Objective: To examine the impact of high-dose X-ray irradiation on the magnetic and structural properties of Gd$_5$Si$_4$ nanoparticles for magnetic hyperthermia treatment.
• Finding: The study found that while X-ray diffraction, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) confirmed no significant structural or compositional changes in Gd$_5$Si$_4$ nanoparticles after high-dose X-ray irradiation, transmission electron microscopy (TEM) revealed localized lattice distortions. TEM's ability to visualize these subtle structural changes at the nanoscale was crucial for understanding the observed alterations in magnetic properties, despite the magnetocaloric properties and specific loss power remaining unaffected, supporting Gd$_5$Si$_4$'s stability for radiotherapy and deep-space applications.

38. Self-ion implantation and structural relaxation in amorphous silicon

• Authors: J. M. Gibson, Robe Elliman, T. Susi, C. Mangler
• Date: 2025-05-30
• Objective: To study the structure and properties of self-ion implanted amorphous silicon (a-Si) and its structural relaxation upon thermal annealing.
• Finding: Using Fluctuation Electron Microscopy (FEM), the study observed Medium-Range Order (MRO) in self-ion implanted amorphous silicon, which first increases then decreases upon thermal annealing before recrystallization, challenging the Continuous Random Network (CRN) model. FEM, a specialized electron microscopy technique, was essential for directly observing and quantifying the degree of MRO, providing critical insights into the structural evolution of a-Si and supporting the favorability of the paracrystalline (PC) model over the CRN model.

39. Sequential tilting 4D-STEM for improved momentum-resolved STEM field mapping

• Authors: Christoph Flathmann, Ulrich Ross, Jürgen Belz, Andreas Beyer, Kerstin Volz, Michael Seibt, Tobias Meyer
• Date: 2025-05-29
• Objective: To present an alternative approach to precession electron diffraction for momentum-resolved scanning transmission electron microscopy (MRSTEM) field mapping by sequentially tilting the incident electron beam.
• Finding: The study introduced a sequential tilting 4D-STEM approach that records full diffraction patterns for each tilt and spatial position, enabling improved momentum-resolved STEM field mapping without hardware modification. This method, by collecting comprehensive 4D-STEM data, allows for the creation of virtual large-angle convergent beam electron diffraction (vLACBED) patterns to assess data quality and apply advanced data analysis methods, significantly enhancing the resolution and accuracy of field measurements in electron microscopy.

40. Stoichiometry control and epitaxial growth of AgCrSe2 thin films by pulsed-laser deposition

• Authors: Yusuke Tajima, Kenshin Inamura, Sebun Masaki, Takumi Yamazaki, Takeshi Seki, Kazutaka Kudo, Jobu Matsuno, Junichi Shiogai
• Date: 2025-05-28
• Objective: To achieve stoichiometry control and epitaxial growth of polar magnetic semiconductor AgCrSe$_2$ thin films on yttria-stabilized zirconia (111) substrate using pulsed-laser deposition.
• Finding: The study successfully achieved epitaxial growth of c-axis-oriented and single-phase AgCrSe$_2$ thin films by using an Ag-rich PLD target to compensate for Ag deficiency. Cross-sectional scanning transmission electron microscopy (STEM) was crucial for structural analysis, revealing epitaxial growth with the presence of both twisted and polar domains, confirming the film's high quality and stoichiometric feature, consistent with bulk properties.

41. Tuning Ultra-Narrow Direct Bandgap in alpha-Sn Nanocrystals: A CMOS-Compatible Approach for THz Applications

• Authors: Tiziano Bertoli, Elena Stellino, Francesco Minati, Camilla Belloni, Giovanni Tomassucci, Emanuele Bosco, Silvano Battisti, Leonardo Puppulin, Demetrio Logoteta, Alessandro Nucara, Luisa Barba, Gaetano Campi, Naurang Lal Saini, Fabrizio Palma, Michele Back, Pietro Riello, Fernanda Irrera
• Date: 2025-05-27
• Objective: To synthesize nanoparticles with inner alpha-Sn nanocrystals on a Silicon substrate via a CMOS-compatible microwave irradiation process and tune their ultra-narrow direct bandgap for THz applications.
• Finding: The study successfully synthesized nanoparticles containing alpha-Sn nanocrystals on Si substrates using a CMOS-compatible microwave irradiation process, demonstrating control over nanoparticle size. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) were used to characterize the nanoparticle morphology, providing visual evidence of size control through dewetting and coalescence, which is critical for tuning the bandgap and exploring their potential for CMOS-compatible THz devices.

42. Degradation and SEI Evolution in Alloy Anodes Revealed by Correlative Liquid-Cell Electrochemistry and Cryogenic Microscopy

• Authors: Neil Mulcahy, Syeda Ramin Jannat, Geri Topore, Lukas Worch, James O. Douglas, Baptiste Gault, Mary P. Ryan, Michele Shelly Conroy
• Date: 2025-05-27
• Objective: To resolve the evolution of a platinum alloy anode at the solid-liquid interface during electrochemical cycling using a correlative operando characterization approach.
• Finding: The study employed a correlative workflow integrating electrochemical liquid cell transmission electron microscopy (LC-TEM) with cryogenic atom probe tomography (APT) to reveal the spatially heterogeneous solid electrolyte interphase (SEI) formation and degradation pathways in a platinum alloy anode. LC-TEM allowed for in situ observation of dynamic processes at the interface, while cryogenic conditions preserved fragile interfacial chemistries, providing unprecedented direct mechanistic insight into lithium alloying, SEI evolution, and irreversible lithium loss, which are otherwise challenging to observe due to the mobility and reactivity of lithium.

43. Highly Enhanced robust room temperature ferromagnetism in CVD-grown nano-dimensional MoS2 flakes by modifying edges and defect engineering

• Authors: Sharmistha Dey, Nahid Chaudhary, Ulrich Kentsch, Rajendra Singh, Pankaj Srivastava, Santanu Ghosh
• Date: 2025-05-27
• Objective: To investigate the alterations in magnetic properties and electronic structure of CVD-grown nano-dimensional MoS$_2$ after low energy ion irradiation, focusing on inducing room-temperature ferromagnetism.
• Finding: The study demonstrated highly enhanced room-temperature ferromagnetism in CVD-grown nano-dimensional MoS$_2$ flakes after low energy Argon ion irradiation, attributed to edge modification and defect engineering. Field Emission Scanning Electron Microscopy (FESEM) images confirmed the triangular flake formation in pristine samples and revealed fragmentation into smaller flakes with increasing irradiation fluences, thereby enhancing the number of edge-terminated structures, which was crucial for understanding the induced ferromagnetism.

44. Comparative study of microscopy methods to assess fish intestinal microvilli

• Authors: Ankit Butola, Luis E. Villegas-Hernández, Dhivya B. Thiyagarajan, Bartłomiej Zapotoczny, Roy A. Dalmo, Balpreet Singh Ahluwalia
• Date: 2025-05-26
• Objective: To present a comprehensive investigation and systematic comparison of different optical, electron, and force microscopy methods for the analysis of fish intestinal microvilli.
• Finding: The study systematically compared various microscopy techniques for resolving and quantifying fish intestinal microvilli features, ranging from 1-2 $\mu$m structural morphology to 10-100 nm surface details. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were employed to obtain ultra-high resolution images, providing critical insights into the structural organization, spatial distribution, and surface properties of microvilli that are essential for understanding fish health and nutrient absorption, demonstrating their superior resolution for nanoscale biological structures compared to optical methods.

45. Structural, magnetic, and nanoacoustic characterization of Co/Pt superlattices

• Authors: E. R. Cardozo de Oliveira, C. Xiang, C. Borrazás, S. Sandeep, J. E. Gómez, M. Vásquez Mansilla, N. Findling, L. Largeau, N. D. Lanzillotti-Kimura, M. Granada
• Date: 2025-05-25
• Objective: To study the structural, magnetic, and acoustic characteristics of nanometric Pt/Co superlattices.
• Finding: The study characterized nanometric Pt/Co superlattices, finding a well-defined periodicity and perpendicular magnetic anisotropy for higher Co concentrations. Scanning transmission electron microscopy (STEM) with local compositional analysis was crucial in revealing that the superlattices exhibit a modulation in composition rather than sharp interfaces, and transmission electron microscopy (TEM) further evidenced their polycrystalline nature, providing essential structural details that underpin their magnetic and nanoacoustic properties.

46. Effect of Fluorine doping on the electrocatalytic properties of Nb2O5 for H2O2 electrogeneration

• Authors: Aline B. Trench, João Paulo C. Moura, Caio Machado Fernandes, Mauro C. Santos
• Date: 2025-05-23
• Objective: To examine the effect of fluorine (F)-doping on the electrocatalytic properties of Nb$_2$O$_5$ nanoparticles for hydrogen peroxide (H$_2$O$_2$) electrogeneration via the oxygen reduction reaction (ORR).
• Finding: The study found that F-doped Nb$_2$O$_5$ nanoparticles significantly enhanced H$_2$O$_2$ electrogeneration efficiency. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for morphological and structural characterization of the nanoparticles, providing visual evidence of their incorporation into the carbon support. These electron microscopy techniques, alongside other characterizations, helped to correlate the enhanced performance with F doping-induced lattice distortion and disorder in Nb$_2$O$_5$, which improved electron availability and facilitated O$_2$ adsorption and electron transfer.

47. F-ANcGAN: An Attention-Enhanced Cycle Consistent Generative Adversarial Architecture for Synthetic Image Generation of Nanoparticles

• Authors: Varun Ajith, Anindya Pal, Saumik Bhattacharya, Sayantari Ghosh
• Date: 2025-05-23
• Objective: To introduce F-ANcGAN, an attention-enhanced cycle consistent generative adversarial system, for generating realistic scanning electron microscopy (SEM) images of nanoparticles directly from segmentation maps.
• Finding: The F-ANcGAN system successfully generated realistic scanning electron microscopy (SEM) images of nanoparticles from segmentation maps, addressing the challenge of limited high-quality annotated datasets for nanoscale imaging. While SEM is the target image type for generation, the paper highlights the importance of such synthetic data for improving the effectiveness of downstream segmentation task training in nanoparticle analysis, thereby indirectly supporting the broader application of electron microscopy in materials science by enabling better data analysis.

48. Improvement of H$_2$O$_2$ electrogeneration using a Vulcan XC72 carbon-based electrocatalyst modified with Ce-doped Nb$_2$O$_5$

• Authors: Aline B. Trench, João Paulo C. Moura, Vanessa S. Antonin, Caio Machado Fernandes, Liying Liu, Mauro C. Santos
• Date: 2025-05-22
• Objective: To investigate the improvement of H$_2$O$_2$ electrogeneration using a Vulcan XC72 carbon-based electrocatalyst modified with Ce-doped Nb$_2$O$_5$.
• Finding: The study demonstrated that Ce-doped Nb$_2$O$_5$ significantly improved H$_2$O$_2$ production via the oxygen reduction reaction. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized for the morphological and structural characterization of the electrocatalysts, providing visual evidence of the nanoparticles and their distribution. These electron microscopy techniques, combined with other characterizations, helped to attribute the enhanced performance to Ce doping-induced local distortions in the Nb$_2$O$_5$ crystal lattice, which, along with increased hydrophilicity, facilitated electron transfer and O$_2$ transport, thus favoring the ORR.

49. phaser: An all-in-one package for (multislice) electron ptychography

• Authors: Colin Gilgenbach, James M. LeBeau
• Date: 2025-05-20
• Objective: To present 'phaser', an open-source Python package providing a unified interface for conventional and gradient descent-based ptychographic algorithms for electron microscopy.
• Finding: The study introduced 'phaser', a new open-source Python package designed to streamline and accelerate electron ptychography reconstructions, a groundbreaking electron microscopy technique for advanced materials characterization. 'Phaser' offers a unified interface for various reconstruction algorithms, including novel gradient descent methods, and achieves a 6x improvement in iteration speed over state-of-the-art packages, while also delivering improved reconstruction quality, directly enhancing the capabilities and accessibility of electron ptychography.

50. Atomic Topology and Magnetic Microstructure of Highly Mobile Type I and Supermobile Type II Twin Boundaries in 10M Ni-Mn-Ga Single Crystal

• Authors: Ladislav Straka, Marek Vronka, Jan Maňák, Petr Veřtát, Hanuš Seiner, Oleg Heczko
• Date: 2025-05-20
• Objective: To investigate the atomic topology and magnetic microstructure of individual, highly mobile Type I and Type II twin boundaries in 10M Ni-Mn-Ga martensite.
• Finding: The study investigated twin boundaries in 10M Ni-Mn-Ga martensite, revealing atomically sharp Type I and Type II twin boundaries, contrary to previous suggestions of a diffuse nature for Type II. High-resolution transmission electron microscopy (HRTEM) confirmed the atomic sharpness and orientation of these boundaries, while Lorentz TEM (LTEM) showed 180° domain walls within martensite variants and demonstrated that magnetic induction reorients sharply across both twin boundaries, forming 90°-like magnetic domain walls, providing crucial insights into the interplay between structural and magnetic features at the nanoscale.